All About Basic Stamping Techniques


By Estela Bolton

Although fabulous stamping techniques in and also of themselves are not very hard to attain, getting a crisp clean image, can quite often be challenging for new practitioners who produce stamps. It is vital to observe a few vital tips in order to obtain the best possible results. Start by ensuring your stamp is inked properly.

It should be completely covered, plus there should be no particular streak or drag marks too in the ink. As well, you would want to ensure the stamp is entirely free of any little amounts of dirt, debris or fluff. Prepare the stamp-generation surface by making sure it is both firm and flat, plus covered with certain kind of scrap paper.

If such a paper piece which you are stamping on turns to be rather small, you might want to then stick it to your scrap paper temporarily using temporary adhesive. Once this stamp has been inked well and paper is ready, make sure to grip block with firmness on either of the sides using the fingers. Then, press stamp straight downwards and image side down as well onto stamp-producing surface while utilizing slight pressure downwards, after which then lift it up in straight manner.

If the stamp turns out larger than intended, you can then employ fingers of the other hand to gently press down the stamp middle. This should in effect ensure every portion of image stamps comes out well. Make sure to ascertain this by up plus down movement during the exercise.

Press straight down then lift straight up. Avoid rocking your stamp. Rocking the stamp back and forth is most common mistake that is made by new stamp-producing professionals. The rocking exercise could lead to smeared image if not careful when doing it.

Avoid transferring excessive ink that is either lying idle, within the stamp or on your block onto the surface being stamped. It is critical acquiring knowledge regarding what kind of pressure is needed when executing the stamping exercise. For example, one could wish to apply more pressure while generating stamps on large size of image which is solid, contrary to when doing this practice on some small image.

Also, different kinds of stamps, including rubber, foam or clear acrylic can withstand varying amounts of pressure. By example, since rubber is firmer material than acrylic, you may press harder, then as general rule still obtain good image. With acrylic however, if you do apply same level of pressure as when rubber is involved, you might get a smeared image. If never having stamped with some particular image previously or certain kind of stamp, it’s might be good taking it for test run first.

Practice making stamps with such device onto a grid paper up until you are satisfied with the results obtained. At last, once you have stamped your image, do remember that going by the type of ink used, you might require giving it some little more time for drying. By having these suggestions in your mind, it is possible to come out with outstanding results every time when applying various stamping techniques. Check the Web for further essential details on the subject as well.

Read more about Facts Concerning Fundamental Stamping Techniques visiting our website.


Article kindly provided by UberArticles.com


Topics:
Crafts |
Comments Off

Tags: Crafts, Hobbies, home, Home Improvement, Home Projects



Reprint Rights

This article is subject to a revocable license under a Creative Commons Attribution-No Derivative Works 3.0 Unported License, which means you may freely reprint it, in its entirety, provided you include the author’s resource box along with LIVE VISIBLE links (without “nofollow” tags). We may revoke the license at any time with or without cause. You must also include the credit to UberArticles.com.

Comments are closed.


Disclaimer


Uber Articles and its partner sites cannot be held
responsible for either the content nor the originality
of any articles. If you believe the article has been
stolen from you without your permission, please contact
us and we will remove it immediately. If you have a
problem with the accuracy or otherwise of the content
of an article, please contact the author, not us! Also,
please remember that any opinions and ideas presented
in any of the articles are those of the author and
cannot be taken to represent the opinions of Uber
Articles. All articles are provided for informational
purposes only. None of them should be relied upon for
medical, psychological, financial, legal, or other
professional advice. If you need professional advice,
see a professional. We cannot be held responsible for
any use or misuse you make of the articles, nor can we
be held responsible for any claims for earnings, cures,
or other results that the article might make.

Article Source

Leave a Reply

Your email address will not be published. Required fields are marked *